Jetta L4-1.9L DSL Turbo (BRM) (2006)
Heating And Ventilation Unit, Removing And Installing
Preparation:
Special tools, testers and auxiliary items required
-
Drip tray for VAS6100 VAS 6208
-
Hose clamps, up to 40 mm. 3093
-
Compressed air gun, commercially available
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
NOTE: To improve accessibility, additional components e.g. engine cover must be removed (depending on engine version).
-
Remove instrument panel.
-
Remove facing wall in plenum chamber.
-
Remove left and right rear footwell channels
-
Place Drip tray for VAS6100 VAS 6208 under the engine.
-
Mark coolant hoses -1-
CAUTION:
-
Scalding danger:
-
The cooling system is pressurized when the engine is warm. Wear gloves and other protection and carefully release system pressure if
necessary before performing repairs.