Jetta L4-1.9L DSL Turbo (BRM) (2006)
-
Check wires between test box and 8-pin connector for open circuit according to wiring diagram.
Contact
Test box socket
3
51
4
39
Wiring resistance: max. 1.5 Ohms
-
Check wires for short circuit to each other.
Specification: Infinite Ohms
If no malfunction is detected in wiring:
-
Replace Transmission Input Speed (RPM) Sensor G182.
-
Erase DTC memory for Transmission Control Module (TCM) J217. See: Powertrain Management/Computers and Control Systems/Testing and
Inspection/Scan Tool Testing and Procedures/Diagnostic Mode 04 - Erase DTC Memory
-
Generate readiness code. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Monitors, Trips, Drive Cycles and
Readiness Codes/Readiness Code, Generating