Jetta L4-1588cc 1.6L DSL SOHC (ME) (1989)
/Page-414002.png)
NOTE: The 0-ring between the coolant pump housing and the engine block does not require sealer.
2. Loosely install the coolant pump on the engine. The two short bolts are used at the top of the pump housing. Torque the four bolts evenly to 20
Nm (15 ft lb). Refasten the camshaft drive belt cover to the coolant pump.
3. Install the hoses and refill the cooling system. Install and adjust the V-belt.
