Volkswagen Workshop Manuals
Jetta L4-1781cc 1.8L SOHC (ACC) Can (1995)
Powertrain Management > Sensors and Switches - Powertrain Management > Sensors and Switches - Computers and Control Systems > Camshaft Position Sensor > Component Information > Diagrams > Diagram Information and Instructions > Page 1946
numerous diagrams in the series before picking up again on the destination diagram. When these wires/circuits enter or leave a diagram, the track
HOW DO I NAVIGATE THE DIAGRAMS VIA THE TRACK NUMBERS?
Assume you are tracing the wire/circuit identified by its size and color as 2,5 sw/ro on the diagram named Track 1-14.
This wire/circuit is running on track 8 of the diagram and terminates at the box labeled 175. To continue tracing this wire/circuit, you must now go to
But before going to the diagram named Track 169-182, again make note of the current track that you are leaving, which is Track 8.
After arriving at the diagram named Track 169-182, locate track 175 at the bottom of the diagram.
Follow the imaginary track 175 grid line toward the top of the diagram looking for a box labeled 8 (the track you are coming from).
When you locate the box labeled 8, you have picked up the continuation of wire/circuit 2,5 sw/ro and can continue to trace it until it terminates at either
NOTE: It is equally important that you always know the track that you are coming from as well as the one you are going to.
How to Read Wiring Diagrams
|[PREV PAGE] [NEXT PAGE]|