Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Jetta L4-1781cc 1.8L SOHC (ACC) Can (1995)

Sensors and Switches > Sensors and Switches - Lighting and Horns > Brake Light Switch > Component Information > Locations > Page 703

Page 1
background image

Brake Light Switch: Adjustments

NOTE:  Brake light switch must be removed to adjust.

Adjustments

1. Remove trim under instrument panel
2. Disconnect harness connector at brake light switch
3. Remove brake light switch by rotating 90° to right.
4. Pull brake light switch plunger fully out.
5. Press brake pedal down as far as possible by hand.
6. Guide brake light switch through assembly opening and reinstall by turning 90° to left.
7. Pull brake pedal back up by hand to stop (Brake Light Switch is pushed back by one notch.)
8. Check function of brake light switch.
9. Install instrument panel trim

Sensors and Switches > Sensors and Switches - Lighting and Horns > Brake Light Switch > Component Information > Locations > Page 703

[PREV PAGE] [NEXT PAGE]