Jetta L4-1781cc 1.8L SOHC (RV, PF) (1989)
Relay Box: Technical Service Bulletins
Fuse/Relay Panel - Removal and Installation
SUBJECT:
Fuse/relay panel removal and installation
GROUP
97
NUMBER
89-02 July 31, 1989
MODEL(S):
Jetta (German Production only) m.y. 1989 (from January, 1989)
Beginning in January, 1989, a revised fuse/relay panel has been integrated into German produced 1989 Jetta vehicles. Following is the new removal and
installation procedure for the fuse/relay panel and multi-point connectors, To remove the fuse/relay panel:
^
remove lower instrument panel trim
^
spread retaining clips 1 and disengage lock pins 2 from brackets 4
^
swing retaining clips 1 forward and pull from fuse/relay panel pins 3
^
spread left retaining bracket 4 and disengage from pin 5
^
lift fuse/relay panel from brackets 4
^
remove multi-point connectors from back of fuse/relay panel and remove fuse/relay panel
^
install in reverse order of removal making sure pin 5 and retaining pins 2 engage proper recesses in brackets 4
Multi-point connector, on fuse/relay panel
Removing