Jetta L4-2.0L (AEG) (2000)
^
3409 Wedge
^
Piston resetting tool
Removing
-
Force piston out of brake caliper housing using compressed air.
Note:
^
Place a piece of wood in the recess to prevent damaging the piston.
-
Remove piston seal using wedge 3409.
Note:
^
When removing piston seal make sure that the cylinder bore is not damaged.
Installing
-
Lubricate piston, piston seal and cylinder bore lightly with assembly lubricant G 052 150 A2
-
Install new piston seal in caliper.
-
Place protective seal with outer sealing lip on piston.