Replacing Air Flap Motors for Climate Control Regulation in Jetta L4-20L (AEG) (2000)
Air Door Actuator / Motor: Service and Repair
Air Flap Motors (For Climate Control Regulation), Replacing
Air Flap Motors (for Climate Control Regulation), Replacing
CAUTION!
Before beginning repairs on the electrical system:
-
Obtain the anti-theft radio security code.
-
Switch the ignition off.
-
Disconnect the battery Ground (GND) strap.
-
After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows.
NOTE: After installing flap motors:
-
Ensure wiring is correctly routed. Harnesses must be routed so that they do not come into contact with moving parts (for example the levers on the
flap motors).
-
Initiate Basic setting, function 04 See Climatronic OBD.
Air flow flap motor -V71-, removing and installing
NOTE: The air flow flap motor also operates the fresh/recirculating air flap.
Removing
-
Remove glove box.
-
With screwdriver, carefully unclip air flow flap rod -1- from lever -2-.
-
Disconnect electrical connector -1-.
-
Remove screw -3-.
The flap motor is connects to the evaporator housing portion of the heating and A/C unit. To prevent damage:
-
Lower flap motor and at the same time pull off fresh air/recirculating air flap shaft -2-, arrow -A-.