Jetta L4-2.0L (AEG) (2000)
Turn Signal Bulb: Service and Repair
Front Turn Signal Bulb, Replacing
CAUTION: Do not touch bulb glass when installing a new bulb. Fingers leave traces of grease on the glass, which evaporate when bulb is switched on,
causing glass to cloud over.
-
Turn bulb holder (arrow) to left and pull out of housing.
-
Remove bulb from housing.
Installation is in reverse order of removal.
NOTE: Be sure bulb holder engages in housing when installing.
-
Attach sealing cap.
-
Always check turn signal function after installing new bulb.