Jetta L4-2.0L (AEG) (2000)
Turn Signal Switch: Service and Repair
Steering Column Switch/ Combination Switch/ Turn Signal Switch
Special tools and workshop equipment required
-
Torque Wrench -V.A.G 1331-
WARNING!
Always follow the instructions regarding disconnecting and connecting the battery.
Removing
-
Disconnect the battery. Please refer to See: Starting and Charging/Battery/Service and Repair
-
Remove driver's airbag. Please refer to See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair
-
Remove the steering wheel. Please refer to See: Steering and Suspension/Steering/Steering Wheel/Service and Repair
-
Remove the return ring with slip ring. Please refer to See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and
Repair
-
Disconnect the connectors from the steering column switch.
-
Loosen the clamping bolt of the steering columns switch -arrow- and pull the steering column switch rearward and off from the steering column.
Installing
-
Install in reverse order of removal.