Jetta L4-2.0L (AEG) (2000)
Power Window Switch: Service and Repair
Power Window Switches In Passenger's Doors, Remove/Install
Power Window Switches In Passenger's Doors, Removing And Installing
NOTE: The procedure for removing and installing the
-
Right front window switch -E41-
-
Left rear window switch -E52-
-
Right rear window switch -E54-
is essentially the same for all switches.
Removing the right front window switch -E41- is illustrated below.
Removing
-
Removing (appropriate) door trim
-
Disconnect electrical connector.
-
Bend mounting frame -B- out on the longer switch side -A- and remove switch from mounting frame.
Installing
-
Connect electrical connector.
-
Insert switch -A- in recess in mounting frame -B- and engage.