Jetta L4-2.0L (AEG) (2000)
1 - Thrust bolt E-15
2 - Support E-40
3 - Piston cylinder HKZ-15
4 - Special nut E-8-214 and pull rod
5 - High pressure hose with quick release coupling
Pulling out wheel bearing
-
Remove circlip.
-
Install press piece - 1 - with shoulder to bearing, press sleeve - 2 - with four stepped internal diameters to wheel bearing housing, piston cylinder -
3 - with pull rod and special nut - 4 - .
-
Operate pump and remove the wheel bearing.
1 - Thrust tube E-5
2 - Press sleeve E-65-1
3 - Piston cylinder HKZ-15
4 - Special nut E-8-214 and pull rod
Pulling off bearing inner race from hub
Pressing in wheel bearing
-
Clean hole from wheel bearing housing