Jetta L4-2.0L (AEG) (2000)
-
Completely grease hole with Molykote grease.
-
Molykote grease, G 052 723 A2
-
Use grease packet from repair kit
-
Install wheel bearing -1 - - press piece - 2 - install with collar in bearing) and piston cylinder - 3 - with pull rod on wheel bearing housing.
-
Install thrust piece - 4 - with wide collar toward wheel bearing housing and special nut - 5 - on inside.
-
Press wheel bearing in by operating pump.
-
Insert circlip with needle nose pliers.
1 - Wheel bearing
2 - Thrust tube E-13-1
3 - Piston cylinder HKZ-15
4 - Thrust tube E-10
5 - Special nut E-8-214 and pull rod
Pressing in wheel hub
-
Install hub - 1 - and piston cylinder - 2 - with pull rod on wheel bearing.
-
Install special nut - 4 - and thrust piece - 3 - (with collar toward special nut) on inside.
-
Press in hub by operating the pump.
1 - Wheel hub
2 - Piston cylinder HKZ-15
3 - Thrust tube E-5
4 - Special nut E-8-214 and pull rod
Further installation is in the reverse sequence to removal.