Jetta L4-2.0L (AZG) (2004)
Global Positioning System Display Unit: Service and Repair
Telematic Control Head -E264-, Removing And Installing
Removing
Before beginning repairs on the electrical system, disconnect battery.
-
Using appropriate screwdriver, carefully unclip control head from areas indicated with -arrows-.
-
Remove control head in direction of -arrows-.
-
Disconnect electrical connection.
CAUTION: Telematic control head buttons cannot be removed, dismantled or serviced separately. Should malfunctions occur, replace complete control
head.
Installing
Install in reverse order of removal.
-
Check telematic system coding and recode if necessary.