Jetta L4-2.0L (AZG) (2004)
Front Bumper Cover / Fascia: Service and Repair
Bumper Cover, Assembly Overview
Bumper cover, assembly overview
Note:
Slight changes may have to be made to removal and installation procedures, depending upon equipment installed in vehicle.
1. Bumper cover
Material - PP/EPDM
Removing, refer to Bumper cover, removing and installing See:
2. Bolt
Qty. 7
6.6 Nm
3. Guide piece
To remove and install, pull out/slide in bumper cover parallel out of guide pieces (left and right sides).
4. Wheelhousing liner