Jetta L4-2.0L (AZG) (2004)
Scuff Plate: Service and Repair
Sill Panel Trim, Removing and Installing (4-Door)
Sill Panel Trim, Removing And Installing (4-door)
NOTE: Removal and installation is described for right side of vehicle. Same instructions apply for removal and installation for left-hand side.
Removing
-
Fold seat cushion and backrest forward.
-
Remove lower A-pillar trim.
-
Remove lower B-pillar trim.
-
Unscrew press button - 2 - from threaded pin - 5 -.
-
Remove trim - 1 - from body flange - 4 - with clips - 3 -.
-
Unclip sill panel trim - 1 - upward at left and right of B-pillar.
-
Unclip sill panel trim - 1 - from B-pillar toward center of vehicle.
NOTE: Cover - 5 - is located behind seatbelt.