Jetta L4-2.0L (AZG) (2004)
Center Mounted Brake Lamp: Service and Repair
High-Mount Brake Light, Removing and Installing
Wagon
High-mount Brake Light (Jetta Wagon), Removing And Installing
The high-mount brake light is installed in the upper part of the rear window.
Removing
-
Switch off all electrical consumers, switch off ignition key and remove ignition key.
-
Remove upper and lower rear lid trim.
-
Remove screws -arrows-.
-
Disconnect electrical connector.
-
Install in reverse order of removal.
Sedan
High-mount Brake Light (Jetta), Removing And Installing
The high-mount brake light is installed in the rear shelf.
Removing
-
Switch off all electrical consumers, switch off ignition key and remove ignition key.
-
Disconnect electrical connector from high- mount brake light.
-
Remove rear shelf