Jetta L4-2.0L (AZG) (2004)
Engine: BBW
1. Filler cap
^
With retaining device
^
- Replace if damaged
2. Mounting screw
3. Tank flap unit
4. Washer
5. 7 Nm
6. Flange
7. From Evaporative Emissions (EVAP) canister
8. To EVAP canister
9. Non-return valve
^
For removal remove fuel tank
^
For removal press tabs in
^
Must have a passageway in direction of filler neck
10. 10 Nm
11. Non-return valve for fuel pump
12. Breather pipe
^
White
^
Check seated securely
^
Clipped onto side of fuel tank
13. To the suction jet pump
^
Suction jet pump installed tightly in fuel tank to drain tank.
14. Fuel delivery unit
15. Fuel tank
^
When removing, support with engine/transmission jack V.A.G. 1383 A
16. Securing strap
^
- With rubber profile and distance piece
17. 20 Nm - 1/4 turn (90°) further
^
- Always replace
18. 20 Nm - 1/4 turn (90°) further
^
- Always replace
19. 3 Nm
20. Heat shield
^
- For fuel tank
21. To EVAP canister purge regulator valve - N80 .item - 8 -
22. Union for supply line
23. To fuel rail
24. Fuel filter
25. To union in fuel tank
26. Supply line
^
Black
^
Check if seated securely
^
To remove fuel filter and union press safety ring in at junction piece
^
Observe installed position: long straight connection (arrow) faces fuel filter
27. Seal
^
Replace
^
Observe installed position: Bulge lies on fuel tank
Fig. 1 Installed position of flange of fuel delivery unit
The arrow -A- on the flange must be parallel with the vehicle longitudinal axle and must face backward, -B-.