Jetta L4-2.0L (AZG) (2004)
- Indicated on display:
‹› Press buttons -0- and -8-. (Function "Read measured value block" is selected with -08-).
- Indicated on display:
‹› Confirm entry with Q button.
- Indicated on display:
‹› Press buttons-0--0--5-. (-005- selects the "Display group number -005-").
‹› Confirm entry with 0 button.
- Indicated on display:
‹› First display zone shows ATF temperature.
- Bring ATF to test temperature.
‹› Test temperature: 35° C to 45 °C (95 to 113° F).
- Remove ATF level plug from oil pan.
- ATF in overflow line runs out.
- If ATF drips out of hole:
‹› ATF need not be topped up.
- Install new seal (arrow 1) on plug and tighten to 15 Nm (11 ft.lb). ATF check is completed.
- Plug (arrow 3) and cap (arrow 4) remain closed.