Jetta L4-2.0L (AZG) (2004)
-
Vehicle identification No. 1JWD039151; in the Brussels plant from; 1J WB 062 360
The modified tie rod ball joints can be recognized by the following features.
A - Right-hand tie rod ball joint
1 - Hex on internally threaded shaft, wrench size 19 mm Dimension - a -; 94 + 0 5 mm (3 701 + 0 0197 inch) Identification - A - for right
B - Left-hand tie rod ball joint
1 - Hex on internally threaded shaft' wrench size 19 mm Dimension - a -; 94 + 0 5 mm (3 701 + 0 0197 inch) Identification - B - for left
Identifying features for the previous tie rod ball joint
1 - Flats for wrench on the shaft, marked with R or L Wrench size 22 mm Dimension - a -; 74 + -1 mm The shaft - arrow - is round
Caution: This tie rod ball joint must not be Installed to a tie rod which has a length of - a - = 318.9 mm (12.555 inch)!