Jetta L4-2.0L (AZG) (2004)
^
Support T101 49
-
Measure dimension - a - from the center of the wheel to the lower edge of the wheel housing.
-
Make a note of measurement. This is necessary to tighten bolts for rear axle to bearing bracket.
Removing lower ball joint
-
Remove wheel.
-
First remove spring
Vehicles with ventilated brake discs
-
Remove bolts -1 - from brake caliper and take off brake caliper.
-
Secure brake caliper to body.
-
Remove Phillips-head screw for brake disc and take off brake disc.
Continued for all vehicles
-
Disconnect transverse link at trailing arm - arrow - .
-
Loosen transverse link connection bolt on subframe.