Jetta L4-2.0L (AZG) (2004)
1 - Ratchet handle (commercially available)
2 - T1 0001/8
3 - T10001/11
4 - T1 0001/5
5 - Spring tensioner V.A.G. 1752/1
6 - Bracket V.A.G. 1752/4
Caution: First compress the coil spring, until the upper spring plate is free!
-
Make sure the coil spring is properly seated in the spring holder V.A.G. 1752/4 - arrow -.
Installing coil spring
-
Install coil spring using spring compressor V.A.G. 1752/1 onto lower spring support.
The end of the coil spring must lie against stop - arrow - .
-
Tighten new hex nut on the piston rod.
-
Release spring compressor V.A.G. 1752/1 and remove from coil spring.
-
Installing suspension strut.
Fastener/location Tightening torques:
Hex nut for upper shock absorber mounting Use new nut! ............................................................................................................ 60 Nm (44 ft. lbs.)
Front Suspension Strut, Servicing
Front suspension strut, servicing