Jetta L4-2.0L (AZG) (2004)
-
Guide cable in between heater -3- and footwell vent -1- behind support/ instrument.
-
Shift selector lever into "P" position.
-
Pull out cable slightly from cable sheath and engage in locking lever-arrow B-.
-
Engage cable support bracket in selector lever bracket.
-
Insert locking cable into steering lock.
-
Flattened side of locking cable faces downward during insertion.
-
Press on clip -2- of locking cable -3-.
Installation position:
Push on clip from above. Angled ends of clip face steering lock.
-
Ensure that clip is properly located.
-
Adjust locking cable.
-
Check operation of ignition key withdrawal lock.