Jetta L4-2.0L (AZG) (2004)
Fig. 3 Removing conductor strip
-
Place 3373 onto stop under solenoid valve plug.
-
Pull plug off with 3373 in direction of arrow.
-
Remove bolt -1-.
Fig. 4 Removing valve body/unhooking operating rod
When removing the valve body the manual selector valve -1- remains in the valve body.
-
Shift selector lever/shaft into position "1".
-
Pull manual selector valve out until it is just possible to unhook operating rod -2-.
-
Secure manual selector valve so that it cannot fall out.
Fig. 5 Inserting sealing plug
Pull sealing plug out of housing before removing and installing freewheel. Otherwise, sealing plug and O-ring will be damaged.
-
Fit O-rings to sealing plug.
-
Insert sealing plug in hole in transmission housing -arrow-.