Jetta L4-2.0L (AZG) (2004)
Fig. 4 Revised selector cover and selector shaft
As of transmission build date 04 09 0 bolt -2- is installed in selector cover -1-.
Tightening torque 15 Nm
In conjunction with this the stop sleeve is fitted with a bridge -3-.
Functional check
When shifting down from 5th gear to 4th gear the bolt -2- guides the selector shaft over bridge -3- into 4th gear gate.
Servicing
5 Speed Manual 02J
Gear Selector Mechanism, Installation Position
A -Gear change cable
B -Gate selector cable
C -Heat shield
-
Remove before removing gear selector mechanism.
Arrow -A- gear selection movement
Arrow -B- gate selection movement