Jetta L4-2.0L (AZG) (2004)
Wiper Motor: Service and Repair
WARNING: Before working on the electrical system disconnect the battery Ground (GND) strap.
NOTES:
-
If the vehicle has a security coded radio, obtain code number from customer before disconnecting the battery.
-
When the battery is reconnected, check operation of electrical equipment (radio, clock and convenience electrics etc.).
Assembly Overview
1
-
Cover cap
2
-
Hex nut
-
13 mm AF
-
15 Nm (11 ft lb)
3
-
Wiper arm
4
-
Seal
5
-
Jet
6
-
Seal
7
-
Wiper motor
8
-
Hex nut
-
M6
-
8 Nm
9
-
Rubber ring
10
-
Spacer
11
-
Wiper blade
Removing rear wiper motor
-
Remove wiper arm. See: Wiper Arm/Service and Repair
-
Remove rear lid lower trim. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair