Jetta L4-2.0L (BEV) (2004)
Lock Carrier: Procedures
Lock Carrier, Moving to Service Position
Lock carrier service position
-
Remove front bumper cover. See: Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair
-
Disconnect bowden cable at lock.
-
Remove one bolt each at longmembers and screw in Guide rods 3411 at right and left longmembers.
-
Remove bolts and pull lock carrier torward front in area of Guide rods 3411.
Lock Carrier, Service Position
Lock Carrier Service Position