volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Engine Controls - Cold Start Exhaust Noise/DTC P3081|Page 4861 > < Transmission Fluid Temperature Sensor, Checking|Page 4852
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
Engine Controls - Cold Start Exhaust Noise/DTC P3081

01 07 59 

Sept. 4, 2007 

2015970 Supersedes;

^

Technical Bulletin number 2012699 - CD part number W42JETTASWUP3081

^

Technical Bulletin number 2013222 - CD part number W420506JETTAEXH

Vehicle Information

Condition

Note:

Discard CD's associated with the above listed technical bulletins.

Update Programming for ECM Part Number Beginning with "06A" (Canada Only)

The update programming procedure addresses the following concerns:

Note:

Prior to performing Update Programming, please inform the customer that this software update addresses all of the concerns listed above. Once the
Control Module programming is complete, the module cannot be returned to its original state. Please inform the customer that their concern
addressed by this technical bulletin will not be resolved without this software update.

DO NOT perform Update Programming if the customer does not want the Update Programming installed in their vehicle

Technical Background

Updated ECM software that addresses:

^

Incorrect algorithm used in ECM software.

Engine Controls - Cold Start Exhaust Noise/DTC P3081|Page 4861 > < Transmission Fluid Temperature Sensor, Checking|Page 4852