Jetta L5-2.5L (BGP) (2006)
Clutch Release Bearing: Service and Repair
Clutch Release Mechanism, Servicing
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331)
1
Transmission
2
Ball head pin, 25 Nm
‹› Remove grease from extractor lever contact surfaces
‹› Grease with lubricant (G 000 100)
3
Input shaft seal
‹› Replace --> [ 12 Guide sleeve ] See: Manual Transmission/Transaxle/Service and Repair/Overhaul/Transmission Housing and Clutch Housing,
Servicing
4
Guide sleeve
‹› With vulcanized O-ring
‹› If O-ring is damaged, replace guide sleeve together with O-ring.
5
Retaining spring
‹› Secure to clutch release lever