Jetta L5-2.5L (CBTA) (2008)
Seat Occupant Sensor: Service and Repair
Seat Occupied Recognition System Repair Set, With Manual Seat Adjustment
Airbags
Seat Occupied Recognition System Repair Set, with Manual Seat Adjustment
Removing
-
Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).
-
Remove front seat. Refer to --> [ Front Seat ] See: Body and Frame/Seats/Service and Repair/Front Seats.
-
Attach the seat to the fixture for seat repair (VAS 6136).
-
Remove right trim on seat.
-
Remove left trim on seat.
-
Remove bracket and front seat operating lever. Refer to --> [ Front Seat Bracket and Operating Lever ] See: Body and Frame/Seats/Service and
Repair/Front Seats.
-
If present, remove mount for seat drawer. Refer to --> [ Seat Drawer Mount ] See: Body and Frame/Seats/Service and Repair/Front Seats.
-
If present, remove connector - 1 - from Front Passenger's Heated Seat Control Module (J132).
-
If equipped, remove clip - 2 -.
-
Remove clips - 3 -.
-
If present, disconnect connector - 4 - and remove connector from seat frame.
-
Disconnect side airbag connector - 5 - and remove connector from seat frame.
-
Remove line clip - 6 - and disconnect backrest wiring harness from seat frame.