Jetta V6-2.8L (BDF) (2002)
CD Changer: Service and Repair
CD Changer Position (V/H) Switches, Setting
CD Changer Position (V/H) Switches, Setting
-
Check and confirm CD changer position settings via V/H switch (or switches) -arrow- where applicable.
-
Loosen V/H switch retaining screw, slide switch towards the appropriate position according to CD changer's installation position ("V" = vertical,
or "H" = horizontal) and tighten.
-
Tightening torque: 3 Nm (27 in lb)
NOTE:
-
CD playback will skip if switches are not set correctly.
-
Always check/set switches prior to CD installation.
-
Switches must move completely to their end positions.
-
Before sliding CD changer into CD changer bracket ensure that the CD changer cable and connector route to the front side of the CD changer.