Jetta V6-2.8L (BDF) (2002)
Brake Caliper: Service and Repair
Front
FS 111 Brake Calipers
FS 111 front brake calipers, servicing
Note:
^
When carrying out repairs install all parts supplied in repair kit.
^
New brake calipers are filled with brake fluid and are pre-bled.
^
Apply thin coat of lubricant G 052 150 A2 to brake cylinders, pistons and seals.
1. Protective seal
2. Bleed valve
-
Apply thin coat of assembly lubricant G 052 150 A2 to threads before screwing in
3. Cap
-
Insert in mounting bushing
4. Guide pins, 28 Nm (21 ft. lbs.)
5. Mounting bushing
-
Insert into brake caliper housing
6. Brake caliper housing
7. Protective seal
-
Do not damage when inserting piston
8. Piston
-
Removing and installing
-
Apply thin coat of assembly lubricant G 052 150 A2 to piston before inserting
9. Seal
-
Removing and installing
Front brake caliper piston, removing and installing
Special tools and equipment