Jetta V6-2.8L (BDF) (2002)
Installing
Replacement flap motors are supplied in the "recirculating air" position. To ease the installation, first do the following:
-
Connect electrical connector -1- to flap motor -2-.
-
Switch on ignition.
-
Operate button for fresh air/recirculating air.
When the center position has been reached:
-
Disconnect electrical connector -1- from flap motor -2-.
-
Insert flap motor in fresh air/recirculating air shaft -1-.
If the flap motor cannot be attached to the fresh air/recirculating air flap shaft -1-, remove fresh air blower -V2- and attach flap by hand.
-
Turn flap motor in direction of -arrow A- and tighten bolts.
-
Attach operating rod for air flow flap.
-
Initiate Basic setting, function 04 See Climatronic, OBD.
Central flap motor -V70-, removing and installing
First do the following:
-
Remove glove box.
-
Remove trim under the steering column.
-
Remove center console.
-
Remove connecting duct.
Removing