Jetta V6-2.8L (BDF) (2002)
-
Remove screws -arrows-.
-
Remove center trim.
-
Remove controls with cables attached.
-
Disengage cables from controls.
-
Disconnect electrical connectors.
After removing controls, check all cables for free movement.
-
Move cables back and forth in direction of arrows.
-
Replace cables that are damaged or hard to move.
Installing
NOTE:
-
Cable sleeve ends are color coded.
-
All air flaps must audibly move onto end stops when turning controls.
-
Always check cables before installing. Replace binding or damaged cables.