Jetta GLS L4-1.8L Turbo (AWP) (2002)
Front Bumper Cover / Fascia: Service and Repair
Bumper Cover, Removing and Installing
Bumper cover, removing and installing
Removing
-
Disconnect release lever from lid lock, refer to Release lever, removing. See: Doors, Hood and Trunk/Hood/Hood Latch/Service and Repair
-
Remove radiator grille, refer to Radiator grill, removing and installing. See: Grille/Service and Repair
-
If equipped, remove covers -7- for headlight cleaning system from bumper cover and unclip.
-
Remove bolts -5- securing bumper cover -1- to wheelhousing -4-.
-
Unclip left air guide grille -9- and right air guide grille -11-.
-
Remove bolts connecting bumper cover -1- to sound insulation on left and front underbody.
-
Remove bolts -2-.
-
Remove bumper cover -1- from guide pieces -3- (left and right).
-
Disconnect connector from temperature sensor.
-
Remove spoiler -8- if necessary
Installing