Jetta GLS L4-1.8L Turbo (AWP) (2002)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor on Rear Axle
1
ABS wheel speed sensor
^
Before inserting sensor, clean mounting hole inner surface and coat with lubricant G 000 650
2
Hex socket head bolt, 8 Nm (70 inch lbs.)
3
Stub axle
4
Splash shield
5
Wheel hub with wheel bearing and speed sensor rotor
^
Replace each time after disassembly
^
Only replace complete
6
Self locking 12 point nut, 175 Nm (129 ft. lbs.)
^
Replace each time after removing
7
Cap
^
Pressing off and driving in
8
Brake disc
9
Screw
10
Hex bolt, 60 Nm (44 ft. lbs.)
^
With dished spring
11
Axle beam
Wheel speed sensor on rear axle, removing and installing
Removing
^
Raise vehicle.