Jetta GLS L4-1.8L Turbo (AWP) (2002)
3
Cap
^
Install in mounting bushing
4
Guide pin, 28 Nm (21 ft. lbs.)
^
Removing and installing
5
Mounting bushing
^
Install in brake caliper housing
6
Brake caliper housing
7
Protective seal
8
Piston
^
Before installing apply a thin coat of assembly lubricant, Part No. G 052 150 A2, to piston
9
Piston seal
Front brake caliper piston, removing and installing
Special tools and equipment required
^
3409 Wedge
^
Piston resetting tool
Removing
^
Force piston out of brake caliper housing using compressed air.
Note: Place a piece of wood in the recess to prevent damaging the piston.