volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Relays and Modules - Cooling System > < Radiator|Service and Repair|Page 2209
Page 3
background image

-

Bring lock carrier into service position. Refer to Radiator Support, Service and Repair. See: Body and Frame/Lock Carrier/Service and
Repair/Procedures

-

Remove radiator securing bolts and take radiator with fan out downwards.

Vehicles with Air Conditioner:
Observe additional information and removal work. Refer to Engine, Service and Repair. See: Engine/Service and Repair - "Additonal Information
and Removal Instructions"

WARNING!
The air conditioner refrigerant circuit must not be opened. 

Note:
To prevent damage to condenser also to the refrigerant pipes/hoses, make sure that the pipes and hoses are not stretched, kinked or bent.
-

Remove retaining clamp(s) from refrigerant pipes.

-

Remove condenser from radiator and secure to lock carrier.

Installing 

Installation is carried out in the reverse order, when doing this note the following:
-

Replace O-ring if damaged

-

Fill with new coolant.

Relays and Modules - Cooling System > < Radiator|Service and Repair|Page 2209