Jetta GLS L4-1.8L Turbo (AWP) (2002)
-
Check DTC Memory, if necessary, repair any malfunctions and then Erase DTC Memory,Checking and Erasing DTC Memory. Refer to
"Displaying and Reading Trouble Codes/With Manufacture Scan Tool/Check DTC Memory (Function 02)" See: Testing and Inspection
-
Read readiness code. If DTC memory has been erased or engine control module was disconnected from permanent positive, readiness code must
be generated again: Refer to "Monitors, Trips and/or Drive Cycle/ Reading Readiness Code" See: Testing and Inspection
Engine code AWW, Refer to "Monitors, Trips and/or Drive Cycle/Generating Readiness Code" See: Testing and Inspection
Engine code AWP, Refer to "Monitors, Trips and/or Drive Cycle/Generating Readiness Code" See: Testing and Inspection
Checking oxygen sensor wiring
-
Connect VAG1598/31 test box to control module wiring harness. The engine control module remains disconnected.
-
Remove protective cover -arrows- and separate 6-pin connector (black) -1- to Heated Oxygen Sensor (HO2S) (G39).