Jetta GLS L4-1.8L Turbo (AWP) (2002)
PIN ?
-
Press -> button.
Indicated on display:
Channel 50 Adaptation 32000
Q
Enter adaptation value XXXXX
-
Input the secret number, place a -0- before the 4 digit number (e.g. 01915).
-
Press -Q- button to confirm input.
NOTE:
If displayed:
Function is unknown or can
->
not be performed at the moment
-
Secret number is accepted. Repeat input.
-
3 attempts at entering the secret number correctly are possible immediately. The next 3 attempts are not permitted for at least 10 minutes. During
this time, the ignition must remain constantly switched on. On Board Diagnostic (OBD) must be also exited using the "End Output" function 06.
-
The wait period between each of the next 3 attempts doubles up to the maximum time of 255 minutes.
Indicated on display:
Channel 50 Adaptation 32000
<-1 3->
Indicated on display:
Channel 50 Adaptation 32000
Wait
Indicated on display (example only):
Channel 50 Adaptation 32000
Q
WVWZZZ3BZ1W0000273
After successful adaptation, Vehicle Identification Number (VIN) is indicated in the lower line of the display.
-
Press -Q- button to confirm input.
Indicated on display:
Channel 50 Adaptation 32000
Q
Store changed value?
-
Press -Q- button to confirm input.
Indicated on display:
Channel 50 Adaptation 32000
->
Changed value is stored
-
Press -> button.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Switch off ignition.
-
Switch ignition on again within 60 seconds.
NOTE: When ignition is switched on for the next time, the identification key of the Engine Control Module (ECM) will be read by the control module