Jetta GLS L4-1.8L Turbo (AWP) (2002)
-
Swing wheel with suspension strut out and support.
-
Install ball joint puller, as shown, and press out ball joint.
WARNING:
^
Place engine/transmission jack VAG 1383A, or similar, underneath to ensure safety.
^
For safety reasons and to protect ball joint threads, leave nut threaded on a few turns.
Installing
-
Install new self-locking nut, and counter-hold with T40 Torx hi: bit.
1. Torx bit T40
2. Box wrench insert or slotted ring wrench insert
3. VAG 1331
-
Install ball joint in wheel bearing housing.
-
Secure ball joint to control arm (bolts on old marks).
Use new bolts!