Jetta GLX V6-2.8L (AFP) (2002)
Window clamp, installing on track
^
Install window clamp on track and insert cable crimped ends in identical position as removed (not overlapping).
Tip:
First cable is fitted into deep pocket, then insert second cable into shallow pocket.
^
Flip clamp down towards track.
^
Install second window clamp (B-pillar clamp) near the center of the track and insert cable crimped ends in identical position as removed (not
overlapping).
^
Install window clamp on track and insert cable crimped ends in identical position as removed (not overlapping).
Tip:
First cable is fitted into deep pocket, then insert second cable into shallow pocket.
With both window clamps installed on tracks:
^
Check the four plastic cable guide ends (black arrows) for correct engagement into housing.
With both clamps at the middle of carrier assembly as shown (white arrows):
^
Install cable on last pulley, see "Cable, installing on pulley (notched pulleys)".
Cable, installing on pulley (notched pulleys)
Install cable on last pulley as follows: