Jetta GLX V6-2.8L (AFP) (2002)
^
Press brake pedal in direction of brake booster and hold.
1
Brake pedal
2
Push rod
3
Retaining tabs
^
Insert special tool T 10006 and pull in direction of driver's seat while counter-holding on brake pedal -1-.
Notes:
^
Do not allow the brake pedal to move backward when pulling on special tool T10006.
^
The special tool presses the push rod head off the retaining tabs.
^
The illustration shows the pedal cluster removed.
^
Pull special tool T 10006 and brake pedal towards driver's seat.
Note: The brake pedal will now be pulled off the push rod ball head.
Connecting
^
Hold push rod ball head in front of mounting and push brake pedal in direction of brake booster.
-
Push rod ball must be heard to snap into place
Continue installation in reverse order of removal.
^
Adjust brake light switch