Jetta GLX V6-2.8L (AFP) (2002)
6. Cable guide
-
For coolant hoses and wiring harness.
7. 8 Nm
8. Upper coolant hose
-
To top off radiator.
-
Check for secure seating.
9. Bracket
-
For wiring harness.
10. Lower coolant hose
-
From bottom of radiator.
-
Check for secure seating.
11. To cylinder block
12. After-Run Coolant Pump -V51-
-
Secured to cylinder block by a bracket.
13. Oil cooler
14. O-ring
-
Replace.
15. From cylinder block
16. Coolant pipe
17. Sealing plug, 2 Nm
18. Coolant pump
-
Observe installation position.
-
Check for ease of movement.
-
If damaged or leaking replace complete.
19. 20 Nm
20. Belt pulley
-
For coolant pump.
21. 20 Nm
-
Use Water Pump Wrench -VAG 1590- to loosen and tighten.
22. 25 Nm
23. Expansion tank
-
Perform leak test on cooling system with Cooling System Tester -VAG 1274- and Adapter -VAG 1274/8-.
-
Test pressure: 1.4 to 1.6 bar.
24. Seal
-
Replace if damaged.
25. Sealing Cap
-
Check with Cooling System Tester -VAG 1274- and Adapter -VAG 1274/9-.
-
Pressure relief valve must open at a pressure of 1.5 to 1.6 bar.
26. Seal
-
Replace.
27. Thermostat housing