Jetta GLX V6-2.8L (AFP) (2002)
NOTE:
-
When installing ribbed belts that have already been used, make sure to mark the running direction when they are removed.
-
Before installing the ribbed belt, make sure that all subassemblies (generator, air conditioner compressor, vane pump) are tightly mounted.
-
When installing the belt, ensure correct seat of the ribbed belt in the belt pulleys!
-
Install ribbed belt.
-
Remove hex bolt to reapply tension to ribbed belt.
-
Start engine and check running of belt.
-
Install engine cover.
-
Install center and right engine compartment cover for noise insulation.