Jetta GLX V6-2.8L (AFP) (2002)
Oil Filter Housing: Service and Repair
Oil filter housing, disassembling and assembling
1. Gasket
-
Always replace
-
Observe correct fitting position
-
Lubricate before assembly
2. Filter housing
3. Stop
-
For oil cooler
-
Fastened to the oil filter housing
4. Filter cartridge
-
Maintain regular change intervals
-
With by-pass valve. Opening pressure: 2.0 bar
-
Clip into bottom of oil filter before installing
5. O-Ring
-
Always replace
-
Lubricate before assembly
6. Bottom of oil filter housing, 30 Nm
-
Empty before disassembling
7. Oil drain plug, 10 Nm
8. 25 Nm