Jetta GLX V6-2.8L (AFP) (2002)
Odometer: Service and Repair
Adaptation (function 10)
Use this function to initiate and store the following changes:
-
Adaptation of odometer reading when replacing/exchanging instrument cluster.
-
Adaptation of fuel gauge reading.
Individual functions are called up using the appropriate channel numbers from table below:
Adaptation table:
Odometer, adaptation
NOTE:
-
Market and equipment appropriate coding of instrument cluster must be performed before adaptation of odometer reading.
-
The total distance travelled by the vehicle can be read from the malfunctioning instrument cluster or determined by the vehicle service history.
-
The total distance travelled display of new instrument cluster must not be more than 100 km (62 mi) before adaptation.
-
The total distance travelled to be transferred to the new instrument cluster must exceed 100 km (62 mi).
-
Adapting the total distance travelled is only possible once and only in a positive (upwards) direction.
-
Adaptation can be interrupted with the "C" button of the VAG 1551.
-
Correcting a false entry which has been confirmed is not possible. The instrument cluster must be exchanged for a new one.
-
Adaptation value must be entered in kilometers. For US models, adaptation value must be converted from miles to kilometers first (miles x 1.609 =
kilometers).
Adaptation, example
The malfunctioning instrument cluster has an odometer reading of 89627 km. This reading is transferred to the new instrument cluster as follows:
-
Connect scan tool VAG 1551, select operating mode 1 "Rapid data transfer", switch on ignition and enter address word 17 "instrument cluster".
-
Press -Q- button to confirm input.
-
Press -> button until "Select function"is displayed..
Indicated on display:
Rapid data transfer
HELP
Select function XX