Jetta GLX V6-2.8L (AFP) (2002)
Clutch Switch: Testing and Inspection
With Manufacturer's Scan Tool
Clutch Pedal Switch (Clutch Vacuum Vent Valve Switch -F36-) Signal, Checking
Special tools and equipment
-
VAG1551 Scan Tool (ST) or VAG1552 mobile scan tool with VAG1551/3 adapter cable
-
VAG1598/31 test box
-
Multimeter (Fluke 83 or equivalent)
-
VW1594 adapter set
-
Wiring diagram
Check conditions
-
Fuses 5, 10 and 29 OK
-
Battery voltage at least 11.5 V
Test sequence
-
Connect VAG1551 (VAG1552) Scan Tool (ST).
-
Switch ignition on and press buttons -0- and -1- to insert "Engine Electronics" address word 01.
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -8- to select "Read Measuring Value Block" function 08 and press -Q- button to confirm input.
Indicated on display
Read Measuring Value Block
Input display group number XXX
-
Press buttons -0-, -6- and -6- to input display group number 66 (066) and press -Q- button to confirm input.
Indicated on display: (1-4 = display fields)
Read Measuring Value Block 06
->
1
2
3
4
-
Observe display in display field 2 (2nd digit from left).
Specified value: x 0 x x
-
Depress clutch pedal fully and observe display in display field 2. Specified value: x 1 x x
-
Press -> button.
-
Press buttons -0- and -6- to select "End Output" function 06 and press -Q- button to confirm input.
-
Switch ignition off.