Jetta GLX V6-2.8L (AFP) (2002)
If the indicator does not behave as described:
-
Press -> button.
-
Start output diagnostic test mode and trigger solenoid valve 1 for charcoal filter (N80):
-
Check DTC memory:
-
Read out readiness code:
-
If fault memory has been erased or engine control module was separated from positive voltage supply, readiness code must be regenerated:
If the specification "TEV OK" is attained:
-
Press -> button.
-
Press keys "0" and "6" for function "end output" and acknowledge with "Q."
-
Turn off ignition.