Jetta GLX V6-2.8L (AFP) (2002)
-
Larger groove faces stator support
10. Housing for ATF pump
11. O-ring
-
Always replace
12. Torque converter oil seal
-
Removing and installing
Fig. 1 Checking that the piston rings are correctly located
-
Ensure that ends of piston rings are hooked together.
Fig. 2 Installing and hooking ends of piston ring together
-
Place piston ring in groove.
-
Press sides of ring in and guide ends over one another.
Note: Do not twist piston ring out of groove on one side.